2004-2005 Maserati MC 12 - Approved For Show or Display

2004-2005 Maserati MC 12

The 2005 to 2005 Maserati MC12 is a perfect example of a car that the Show or Display law was written for. The MC12 is a FIA GT1 homologation special. 30 cars made in 2004, of which 25 were sold to the public. 25 made in 2005.  Built off a Ferrari Enzo, sharing much with the Enzo. Think badge engineering, on a much grander, and more expensive scale. If you have the means, then you probably have one.

The MC12 sports a 232 kilogram (511 lb), six-litre (5,998 cc/366 cu in) Enzo Ferrari-derived V12 engine, mounted at 65°.[14] Each cylinder has four valves, lubricated via a dry sump system, and a compression ratio of 11.2:1.[6] These combine to provide a maximum torque of 652 newton metres (481 lbf·ft) at 5500 rpm and a maximum power of 630 PS (460 kW; 620 hp) at 7500 rpm.[6] The redline rpm is indicated at 7500—despite being safe up to 7700—whereas the Enzo has redline at 8200 rpm.[1]

The Maserati MC12 can accelerate from 0–100 kilometres per hour (62 mph) in 3.8 seconds (though Motor Trend Magazine managed 3.7 seconds) and on to 200 kilometres per hour (125 mph) in 9.9 seconds.[1][4][5] It can complete a standing (from stationary) quarter mile in 11.3 seconds with a terminal speed of 200 kilometres per hour (125 mph) or a standing kilometre in 20.1 seconds.[1][5] The maximum speed of the Maserati MC12 is 330 kilometres per hour (205 mph).[5]

The power is fed to the wheels through a rear-mounted, six-speed semi-automatic transmission. The gearbox is the same as the Enzo's transmission (tuned to different gear ratios) but renamed "Maserati Cambiocorsa". It provides a shift time of just 150 milliseconds, and is mechanical with a 215 millimetre (8.5 in) twin plate dry clutch.[4][7][15]

2004-2005 Maserati MC 12

Source:Wikipeida
HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.