1987 BMW M6 - Not Approved

1987 BMW M6

1987 BMW M6 was very similar to the car sold in the US, with one major difference being its horsepower output. The US version producing 256 bhp, versus the European version producing 286 bhp. By 1988 the M6 was a world car.  

In North America (United States and Canada), the E24 M6 was fitted with the catalyzed S38B35 motor, producing 191 kW (256 bhp) and 329 N·m (243 lbf·ft) of torque. The non-catalyzed version produced 213 kW (286 bhp) and 340 N·m (251 lb·ft) of torque. The non-catalyzed versions were only available in Europe, though there were 538 catalyzed M635csi models sold in Europe in 1988 and 1989. The 1988 and 1989 the M6 was a "world car" with the same bumpers and aerodynamic treatments in all markets.

1987 BMW M6

Bimmerforums says that worldwide there were 1476 cars made. Supposedly 750 of them were for the US.  So for this car, very similar to a US model, more than 500 made, was not approved for Show or Display exemption.  Now this car is over 25 years old for NHTSA, and over 21 years old for the EPA, so its legal to import.


Source: Wikipedia
HELP

1992-1994 Jaguar XJ220 - Approved

Jaguar XJ220

1992-1994 Jaguar XJ220

The Jaguar XJ220 was a pretty controversial car. Originally shown as a concept car with a V12, all wheel drive, and an estimated 220 mph top speed, the actual delivered car varied, and did not meet the speed goal. For Show or Display it meets the under 500 produced goal, and is fairly technologically significant. 

"The production version of the car was first shown to the public in October 1991. JaguarSport was charged with producing the car and had several goals/rules: the car would be rear-wheel drive instead of four-wheel drive to save weight and retain racing car dynamics; would have a turbocharged V6 engine instead of the big V12 to improve weight and distribution; and performance goals of over 200 mph (320 km/h), 0 to 60 mph (97 km/h) in 3.6 seconds, and the lightest weight possible.
The 6.2-litre V12 had been judged too difficult to get past emissions regulations and there were also some design problems caused by the size of the power plant. In its place was a Tom Walkinshaw-developed 3.5-litre V6 race engine as used in the Group C XJR-10/11 racers, fitted with twin Garrett T3 turbochargers, generating 542 bhp (404 kW; 550 PS) of maximum power at 7000 rpm and 476 lb·ft (645 N·m) of torque at 4500 rpm."

Even though the original goal was 350 cars, a total of 281 were produced, along with six XJ220S. 

"Some customers were dissatisfied with the increase in delivery price from the original £361,000 to £460,000 as a result of index-linking of their contracts. Another blow was the global recession which took hold between the car's announcement and its eventual release. This caused some 75 speculators to attempt to back out of their commitments, either because they were no longer able to afford them, or because they did not think they could sell the car on for a profit. Further complicating the issue was Tom Walkinshaw's offer of the XJR-15 which was based on the Le Mans winning XJR-9. Some customers either sued Jaguar or threatened to sue; in any case, Jaguar gave customers the option to buy themselves out of the delivery contract. Nonetheless, some buyers challenged Jaguar in court, although presiding Judge Lord Donaldson ruled in Jaguar's favour."

Source: Wikipedia

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle.

Porsche 911 GT1 Strassenversion unloading at Spa-Francorchamps !

Porsche 911 GT1 Strassenversion unloading at Spa-Francorchamps !


"Porsche 911 GT1 Strassenversion being unloaded at Circuit de Spa-Francorchamps in Belgium. Due circumstances, we were not able to film this 911 GT1 Strassenversion doing some laps around the track. In the video you see how the 911 GT1 Strassenversion is unloaded from the trailer and drove in the pitbox and pitlane. This 911 GT1 was transported to the track in a customized trailer."
HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT
Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle.

2002 Mercedes CLK GTR Roadster Video- Approved

2002 Mercedes CLK GTR Roadster Video

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle.

1987 Toyota Carina - Not Approved

1987 Toyota Carina

This is another car, now over 21 years old, so EPA exempt in original configuration  and over 25 years old, so NHTSA/DOT exempt.  However originally it was not approved.  Not a lot of specifics in what this car actually was, but probably this car.

"The Toyota Carina ED was a Japanese compact car created in 1985 as a companion to the 1984 Carina sedan. It was positioned as the 4-door Celica coupe, ushering in a new styling and appearance direction for Toyota products. It gave Toyota Store dealerships an alternative to buyers who desired the luxury of the larger Toyota Crown hardtop, without the tax obligations of a car that exceeded Japanese Government regulations for vehicles larger than the "compact" class. Its design sought to emulate the hardtop styling of large American and European sedans, resulting in a small, low cabin with longer front and rear ends. The ED's B-pillar stood up in the middle with no purpose other than to hinge the rear door on; it was not attached to the roof side of the cabin. "ED" is the initials of "Exciting" and "Dressy"."

No numbers are listed anywhere, but its a normal production car, a lot more than 500 cars produced. Nothing special, nothing technologically significant. Does not meet "Show or Display" requirements. However, now over 25 years old, so import to your hearts content.

Source: Wikipedia

HELP